3 4 inch rock specification

50 lb. 3/4 in. Crushed Stone Gravel - The Home Depot

Jan 25, 2016· Find the Oldcastle 50 lb. 3/4 in. Crushed Stone Gravel 40200015, suitable for use in custom concrete mixes gravel interlocks for good compaction at The Home Depot

Self-Compacting 3/4" stone - JLC-Online Forums

Apr 29, 2003· The Alaskan pipeline, and any set of railroad tracks are other good examples of crushed/washed rock as a footing. I believe that anything above 3/8 inch to 3/4 inch, as long as it is consistently the same size, and any crushed product of the same size will meet this classification.

3/4 Inch Drain Rock | Zanker Landscape Materials

¾" Drain Rock is produced from clean recycled aggregates from concrete. This superior product is free of wire and metals, making it suitable for use in French drains and leaching fields. The drain rock is also useful for pipe bedding in underground projects, and is similar to gravel.

Stone Types - Laurel Aggregates

Laurel Aggregates supplies a variety of high quality crushed stone aggregates, CO2 absorbtion stone, and rip rap material that meets any specification.

Crushed Stone | Tilcon Connecticut Inc.

Crushed stone and/or sand and gravel products suitable for every type and size of construction project are available at 15 Tilcon locations throughout Connecticut. If you need assistance estimating the stone requirements for your project or require further information, please call Tilcon Crushed Stone sales at 860-224-6010, or fax us at 860-225 ...

Drain Rock,Permeable - cllava.com

fine particles in the presence of water. Caltrans specification for Class 1 or 2 permeable materials (drain rock) as specified in Section 68-1.025 shall not be less than 40. This specification, in general, also follows AASHTO specifications. The material is very clean, and all the fines are non plastic and washing is not normally required in

ASTM 57 Stone Specifications | Hunker

Gradation of stone and rock is found by ASTM C136, the Test Method for Sieve Analysis of Fine and Coarse Aggregates. Gage numbers are used to identify aggregate. ASTM No. 57 aggregate is found using a 1.5-inch sieve, through which all of the stones will pass. No ASTM 57 aggregate stone is smaller than a No. 8 seize with a 0.0937-inch sieve.


SECTION 20110 BALLAST AND WALKWAY AGGREGATE PART 1 – GENERAL ... 3/4 inch 0-10 3/8 inch 0-3 No. 4 0-0.5 . Caltrain Standard Specifications 20110-4 September 30, 2011 BALLAST AND WALKWAY AGGREGATE 2. Walkway aggregate (AREMA Size No. 5) shall fall within the following

Section 305 Dense-Graded Base

Effective with the December 2018 Letting 124 2019 Standard Specifications 305.3.2.2 Compacting 1 1/4-Inch Base and 3/4-Inch Base (1) If using a pneumatic roller, do not exceed a compacted thickness of 6 inches per layer. For the first layer placed over a loose sandy subgrade, the contractor may, with the engineer's approval, increase

Division 9 Materials - wsdot.wa.gov

9-00.3 Test for Mass of Galvanizing At the option of the Engineer, the weight of zinc in ounce per square foot required by the various galvanizing Specifications may be determined by an approved magnetic thickness gage suitably checked and demonstrated for accuracy, in lieu of the other methods specified. 9-00.4 Sieves for Testing Purposes

Washed Rock Pit :: Two Rivers Sand & Gravel|Concrete ...

Home > Our Products > Washed Rock Pit . Washed Rock Pit. Click on a product image to open a larger image in a new window . Use our Gravel Calculator to help estimate the amount of product needed. Use this link to open the calculator page in a new window .This may be helpful if you want to use the calculator while remaining on this page for product reference.

Caltrans Riprap Sizes – Plainwater

Mar 03, 2018· Caltrans Standard Specifications. 72-2 ROCK SLOPE PROTECTION. 72-2.02A Rock. For method A placement and the class of RSP described, comply with the rock grading shown in the following table: ... 3/4 inch: 0–10: Granular material must contain at least 90 percent crushed particles when tested under California Test 205. 10,633 total views, 49 ...


STANDARD AND SPECIFICATIONS FOR RIPRAP SLOPE PROTECTION Definition A layer of stone designed to protect and stabilize areas ... presented in Standards and Specifications for Rock Outlet Protection. 3. Streambank Protection – Design criteria for sizing ... the damaged area. Where large stones are to be placed, a 4-inch layer of fine sand or ...

#57 Washed Gravel -(3/4" to 1") - Three Z Supply Inc.

This is a naturally occurring stone. The stones vary in color from gray to brown to tan and are rounded and smooth. It is not a crushed stone so it does not have any edges or corners. Sold by the ton, approximately 1.4 tons per cubic yard.


in this specification. 4 Fractured Faces The crushed rock ballast or trowelling stone shall have at least 75% of the particles by mass with two or more fractured faces and at least 98% of the particles by mass with one fractured face. The above percentages will be required within each sieve size coarser than 3/4-inch (19 mm). 5 Flat Pieces

Road Aggregate 101: Important Stuff - Welcome to Center ...

Road Aggregate 101: Important Stuff ... being the smallest (all material passing a 3/8" sieve). Multi-digit specs represent a blend of one or more of the ten basic specs (i.e. AASHTO 57 is a blend of AASHTO 5 and AASHTO 7). AASHTO Specifications are technically open graded aggregate. ... *Gabion (clean) 4"-8" *Shot Rock 24" ...

3/4 Inch Gray Crushed Stone (CY) - gsgravel.com

3/4 Inch Crushed Stone is all crushed rocks which have all passed through a 3/4 inch square screen. The crushing process results in a very angular finished product. This material will range in size from 3/4 inch down to 1/2 inch and everything in between. This material may be sold by the Cubic Yard or […]

Aggregate | Quality Construction Materials | Pennsy Supply

AASHTO #3. This material is similar to AASHTO #1, but has a 3 inch top size. It is also a bulky material but is somewhat easier to handle. Used primarily in drainage situations. It is a clean material.

Commercial and residential paving – Part 2 | Asphalt magazine

For upgrading longer, existing driveways that carry a mix of traffic, Prather Paving puts down two inches of hot mix asphalt binder, composed of 1/2- or 3/4-inch top size rock and 1.5 inches of a dense graded surface mix. "On small driveways where the subgrade is good, we put down 2 inches of compacted surface mix," says Prather.

DW5455 3/4-Inch by 10-Inch by 12-Inch ROCK CARBIDE ...

DW5455 3/4-Inch x 10-Inch x 12-Inch ROCK CARBIDE SDS Plus Product information Technical Details. Part Number DW 5455 Item Weight ... Technical Specification Warranty [pdf ] Additional Information. ASIN B0000224Z1 Customer Reviews: 4.4 out of 5 ...

PART 2 CONSTRUCTION MATERIALS - greenbookspecs.org

Of that portion which passes the 3/8-inch (9.5mm) sieve but is retained on the No. 4 (4.75mm) sieve, not more than 10 percent shall be gravel particles. Crushed rock

3/8″ Pea Gravel & 3/8″ Crushed Stone - Vita-Crete

Customers and Users of Vita-Crete® Pea Gravel or Crushed Stone: Pea Gravel is semi-round. Crushed stone is more angular. Both are clean, dried and free of organic/deleterious materials. Conforms to ASTM C-33 specifications for 3/8" aggregate. The color …

Drain Rock & Aggregate Drain Rock - Canyon Rock Inc

3/4" Drain Rock. This product is ideally suited for use as drain rock pipe bedding in underground projects. This size drain rock is sometimes used for backfilling retaining walls and can be specified in french drains and leach fields, also used for septic systems.It can also be used for landscaping and is great for homeowners to use as a top coat for baserock driveways.

driveway - What is "3 inch minus"? - Home Improvement ...

Regardless, since the sources of stone tend to use sieves with defined size holes to sort the stone, this tends to tell you the size of the stone to use. So around here, #3 stone means that which will fit through a sieve with 3 inch holes. In some cases, the stone will already have been run past smaller sieves.

Graniterock: Technical Reports

Some agencies refer to the Standard Specifications for Public Works Construction or "Green Book"developed jointly by the Southern California Chapter of the American Public Works Assn. and the AGC. This specification classifies base materials as Crushed Aggregate Base, Crushed Miscellaneous Base,Processed Miscellaneous Base or Select Subbase.

3/4" Crushed Stone - NJ, NY, NYC, PA

The 3/4" crushed stone is an aggregate size that has been crushed, reduced in size and screened through a 3/4" square screen. The material ranges in size from 3/4" to a #4 sieve, and a cubical product is needed for use in Superpave Mixes or projects that have a crush count specification.

19 Spec -Section 301 Base, Subbase, and Subgrade Aggregate

Effective with the December 2018 Letting 118 2019 Standard Specifications 301.2.4 Aggregate Requirements 301.2.4.1 General (1) Obtain material from department-approved sources as specified under and furnish material substantially free of deleterious materials that include: shale, chert, phyllite or other altered rock